Supermicro CSE-825TQ-R720UB Manual de usuario descargar pdf (Pagina 38)

SC825 Chassis Manual

5-16

Checking the Server's Air Flow

Checking the Air Flow

Make sure there are no objects to obstruct airﬂow in and out of the server. In

addition, if you are using a front bezel, make sure the bezel's ﬁlter is replaced

periodically.

Do not operate the server without drives or drive trays in the drive bays. Use

only recommended server parts.

Make sure no wires or foreign objects obstruct air ﬂow through the chassis.

Pull all excess cabling out of the airﬂow path or use shorter cables.

The control panel LEDs inform you of system status. See “Chapter 3: System

Interface” for details on the LEDs and the control panel buttons.

Installation Complete

In most cases, the chassis power supply and fans are pre-installed. If you need to

install fans continue to the Systems Fan section of this chapter. If the chassis will be

installed into a rack, continue to the next chapter for rack installation instructions.

Figure 5-16: Air Shroud in place SC825LP Chassis

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Sin comentarios

Supermicro CSE-825TQ-R720UB Manual de usuario Pagina 38