Supermicro A+ Server 1020A-T, Beige Manual de usuario descargar pdf (Pagina 43)

100

Chapter 5: Advanced Serverboard Setup

5-9

5-7 Adding PCI Cards

1. PCI slots

The H8DAR-T has two PCI-X 133 MHz expansion slots. Two riser cards are in-

cluded with the server to make both PCI-X slots available in a 1U chassis format:

the CSE-RR1U-X riser ﬁ ts into the PCI-X slot #6 to support a full-height, half-length

PCI-X add-on card and the CSE-RR1U-XLP riser ﬁ ts into the PCI-X slot #7 to

support a low proﬁ le PCI-X add-on card.

2. PCI card installation

Before installing a PCI add-on card, make sure it conforms to the correct riser

card (see step 1, above).

Begin by swinging the release tab on the PCI shield that corresponds to the riser

card/PCI-X slot you wish to populate. Insert the PCI card into the correct riser

card (depending on whether it is a standard or low-proﬁ le card), pushing down

with your thumbs evenly on both sides of the card. Finish by pushing the release

tab back to its original (locked) position. Follow this procedure when adding a

card to either slot.

Populating Memory Banks for Interleaved (128-bit) Operation

CPU1

DIMM1A

CPU1

DIMM1B

CPU1

DIMM2A

CPU1

DIMM2B

CPU2

DIMM1A

CPU2

DIMM1B

CPU2

DIMM2A

CPU2

DIMM2B

XX XX

XXXX

XX XXXX

XXXXXXXX

XX XX

XXXX

Notes: X indicates a populated DIMM slot. If adding four DIMMs (with two CPUs in-

stalled), the conﬁ guration in rows 2 and 6 (with DIMMs spread over both CPUs) will result

in optimized performance.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 99 100

Comentarios a estos manuales

Sin comentarios

Supermicro A+ Server 1020A-T, Beige Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Barebones Servidor Supermicro A+ Server 1020A-T, Beige