Supermicro X8DTN+ Manual de usuario descargar pdf (Pagina 81)

Chapter 4: AMI BIOS

4-21

Clear BMC System Event Log

Select OK and press the <Enter> key to clear the BMC system log. Select Cancel

to keep the BMC System log. The options are OK and Cancel.

Caution: Any cleared information is unrecoverable. Make absolutely sure

that you no longer need any data stored in the log before clearing the

BMC Event Log.

Set LAN Conﬁ guration

Set this feature to conﬁ gure the IPMI LAN adapter with a network address as shown

in the following graphics.

Channel Number - Enter the channel number for the SET LAN Conﬁ g com-

mand. This is initially set to [1]. Press "+" or "-" on your keyboard to change

the Channel Number.

Channel Number Status - This feature returns the channel status for the

Channel Number selected above: "Channel Number is OK" or "Wrong Channel

Number".

IP Address Conﬁ guration

Enter the IP address for this machine. This should be in decimal and in dotted

quad form (i.e., 192.168.10.253). The value of each three-digit number separated

by dots should not exceed 255 as shown in the screen below.

Parameter Selector

Use this feature to select the parameter of your IP Address conﬁ guration.

IP Address

The BIOS will automatically enter the IP address of this machine; however it may

be over-ridden. IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0

~ 9, A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).

Current IP Address in BMC

This item displays the current IP address used for your IPMI connection.

MAC Address Conﬁ guration

Enter the Mac address for this machine. This should be in decimal and in dotted

quad form (i.e., 192.168.10.253). The value of each three-digit number separated

by dots should not exceed 255 as shown in the screen below.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 94 95

Sin comentarios

Supermicro X8DTN+ Manual de usuario Pagina 81