Supermicro 2016Ti-HTRF Manual de usuario descargar pdf (Pagina 58)

5-24

SUPERSERVER 2016Ti-HTRF User's Manual

SMB Bus to PCI Slots

Use jumpers JI

2

C1 and JI

2

C2 to en-

able PCI Slot SMB (System Manage-

ment Bus) support to improve system

management for the PCI slots. See

the table on the right for jumper set-

tings. The default setting is disabled.

I

2

C to PCI-Slots

Jumper Settings

Jumper Deﬁ nition

Closed Enabled

Open Disabled

USB Wake-Up

Use the JPUSB1 jumper to enable

the "System Waking-Up via USB

devices" function. This jumper al-

lows you to "wake-up" the system by

pressing a key on the USB keyboard

or by clicking the USB mouse of your

system. This jumper is used together

with the USB Wake-Up function in the

BIOS. Enable both the jumper and the

BIOS setting to enable this function.

See the table on the right for jumper

settings.

Note: The default setting is disabled.

When the "USB Wake-Up" function is

enabled in the BIOS and JPUSB1 is

also enabled, please be sure to re-

move all other USB devices from the

USB ports whose USB jumpers are

set to "Disabled" before the system

goes into standby mode.

USB Wake-Up

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

TPM Support Enable

JPT1 allows the user to enable TPM

(Trusted Platform Modules) support

to enhance data integrity and system

security. See the table on the right for

jumper settings. The default setting

is Enabled.

TPM Support

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

Comentarios a estos manuales

Sin comentarios