Supermicro SYS-7045A-TB Manual de usuario descargar pdf (Pagina 12)

1-2

UPERWORKSTATION 7045A-T/7045A-8 User's Manual

1-2 Serverboard Features

At the heart of the 7045A-T/7045A-8 lies the X7DAE/X7DA8, a dual processor

serverboard based on Intel's 5000X chipset and designed to provide maximum

performance. Below are the main features of the X7DAE/X7DA8. (See Figure 1-1

for a block diagram of the 5000X chipset).

Processors

The X7DAE/X7DA8 supports single or dual LGA771 Intel Xeon 5100/5000 series

processors. Please refer to the serverboard description pages on our web site for

a complete listing of supported processors (http://www.supermicro.com).

Memory

The X7DAE/X7DA8 has eight 240-pin DIMM slots that can support up to 32 GB

of FBD (Fully Buffered DIMM) ECC DDR2-533 SDRAM. The memory is an inter-

leaved conﬁ guration, which requires modules of the same size and speed to be

installed in pairs.

Serial ATA (7045A-T)

An on-chip (ESB2) SATA controller is integrated into the X7DAE to provide a six-

port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 supported.

The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the Serial ATA drives.

Onboard SCSI (7045A-8)

Onboard SCSI is provided with an Adaptec AIC-7902 SCSI chip, which supports

Ultra320 SCSI at a throughput of 320 MB/sec for each channel. The X7DA8 pro-

vides two LVD Ultra320 SCSI ports. The SCSI drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SCSI drives.

 Two (2) Xeon passive heatsinks for LGA771 CPU (SNK-P0018)

 Optional: One (1) rackmount kit [CSE-PT26(B)]

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 125 126

Sin comentarios

Supermicro SYS-7045A-TB Manual de usuario Pagina 12