Supermicro SYS-7045A-WTB Ficha de datos descargar pdf (Pagina 27)

Chapter 3: System Interface

3-3

the system or the ambient room temperature being too warm. Check the routing of

the cables and make sure all fans are present and operating normally. You should

also check to make sure that the chassis covers are installed. Finally, verify that

the heatsinks are installed properly (see Chapter 5). This LED will remain ﬂ ashing

or on as long as the indicated condition exists.

3-4 Drive Carrier LEDs

SATA Drives

Green: Each Serial ATA drive carrier has a green LED. When illuminated, this

green LED (on the front of the SATA drive carrier) indicates drive activity. A

connection to the SATA backplane enables this LED to blink on and off when

that particular drive is being accessed. Please refer to Chapter 6 for instructions

on replacing failed SATA drives.

Red: The red LED to indicate an SATA drive failure. If one of the SATA drives

fail, you should be notiﬁ ed by your system management software. Please refer

to Chapter 6 for instructions on replacing failed SATA drives.

•

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 143 144

Sin comentarios

Supermicro SYS-7045A-WTB Ficha de datos Pagina 27