Supermicro SYS-7046T-H6R Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 102
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Chapter 7: BIOS
7-15
PCI Latency Timer
This feature sets the latency timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,
160, 192, 224 and 248.
PCI IDE BusMaster
When this item is enabled, the AMI BIOS uses PCI bus mastering for reading and
writing to IDE drives. The options are Disabled and Enabled.
PCIe I/O Performance
Some add-on cards perform faster with the coalesce feature, which limits the pay-
load size to 128 MB; while others, with a payload size of 256 MB which inhibits
the coalesce feature. Please refer to your add-on card user guide for the desired
setting. The options are 256 MB and 128MB.
ROM Scan Ordering
This feature allows the user to decide which Option ROM to be activated rst. The
options are Onboard rst and Add-On rst.
PCI-E Slots 1~7 x8
This feature allows the user to Enable or Disable any of the PCI slots. The
options are Enable and Disable.
Onboard LAN Option ROM Select
This feature allows the user to select the onboard LAN option ROM type. The op-
tions are iSCSI and PXE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot
computer using a network interface. The options are Enabled and Disabled.
Boot Graphics Adapter Priority
This feature allows the user to select the priority graphics adapter for system boot.
The options are Auto and Onboard VGA.
XSuper IO Device Con guration
Serial Port1 Address
This option speci es the base I/O port address and the Interrupt Request address of
Serial Port 1. Select Disabled to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port physically becomes
unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its I/O port ad-
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 101 102

Comentarios a estos manuales

Sin comentarios