Supermicro 1012C-MRF Manual de usuario descargar pdf (Pagina 66)

6-6

A+ Server 1012C-MRF User's Manual

Figure 6-3. Removing the DVD-ROM Drive

Carefully lift the server out of the rack.3.

Open the cover by removing the screws from the lips on either side of the 4.

cover then depress the two buttons on the cover to release it.

Push the cover away from you then lift it from the chassis to gain full access 5.

to the inside of the server..

Remove the screws that secure the DVD-ROM drive to the chassis and then 6.

lift the drive out of the chassis. See Figure 6-3.

Replace the top cover when ﬁ nished and reinstall the server into the rack.7.

6-5 Power Supply

The 1012C-MRF has a single 350 watt power supply. This power supply has the

capability of operating at a 100 or 240 input voltage. You must power down the

system and then unplug the AC power cord to completely remove power from the

system before removing the power supply.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 91 92

Sin comentarios

Supermicro 1012C-MRF Manual de usuario Pagina 66