Supermicro 5017C-TF Manual de usuario descargar pdf (Pagina 64)

6-6

SUPERSERVER 5017C-TF User's Manual

Serial ATA Power Cables

SATA power cables should be routed so that they do not block the airﬂ ow through

the chassis. See the serverboard layout diagram for the location of the cable con-

nections.

DVD-ROM Drive Installation

The top cover of the chassis must be opened to gain full access to the DVD-ROM

drive bay. The DVD-ROM drive must have a "slim" proﬁ le to ﬁ t into the 5017C-TF.

Installing a DVD-ROM Drive

Power down the system and remove the AC power cord.1.

Release the retention screws that secure the unit to the rack.2.

Grasp the two handles on either side and pull the unit straight out until it 3.

locks (you will hear a "click").

Depress the two buttons on the top of the chassis to release the top cover 4.

and at the same time, push the cover away from you until it stops. You can

then lift the top cover from the chassis to gain full access to the inside of the

server.

Note: Drives mount on rails and should "click" into place to be correctly and fully

installed in their bays. A red mark on a wire typically designates the location of

pin 1.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 93 94

Sin comentarios

Supermicro 5017C-TF Manual de usuario Pagina 64