Supermicro SuperServer 6028R-TRT Manual de usuario descargar pdf (Pagina 80)

6-6

SUPERSERVER 6028R-TR/TRT User's Manual

Hard Drive Backplane

The hard drives plug into a backplane that provides power, drive ID and bus termi-

nation. A RAID controller can be used with the backplane to provide data security.

The operating system you use must have RAID support to enable the hot-swap

capability of the hard drives. The backplane is already precongured, so no jumper

or switch congurations are required.

DVD-ROM Installation (Optional)

The top cover of the chassis must be opened to gain full access to the DVD-ROM

drive bay. The 6028R-TR/TRT accomodates only slim type DVD-ROM drives. Side

mounting brackets are typically needed to mount a slim DVD-ROM drive in the

server.

Accessing the Inside of the Chassis

1. Grasp the two handles on either side and pull the unit straight out until it

locks (you will hear a "click").

2. Next, depress the two buttons on the top of the chassis to release the top

cover and at the same time, push the cover away from you until it stops. You

can then lift the top cover from the chassis to gain full access to the inside of

the server.

Figure 6-4. Mounting a Drive in a Carrier

Caution: Regardless of how many hard drives are installed, all drive carriers must

remain in the drive bays to maintain proper airow. Use caution when working

around the backplane. Do not touch the backplane with any metal objects and

make sure no ribbon cables touch the backplane or obstruct the holes, which aid

in proper airow.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 125 126

Sin comentarios

Supermicro SuperServer 6028R-TRT Manual de usuario Pagina 80