Supermicro CSE-825TQ-600LPB Manual de usuario descargar pdf (Pagina 34)

SC825 Chassis Manual

5-12

PCI Slot Setup for SC825U (Universal Output)

The SC825U chassis accepts a slightly smaller L-shaped motherboard to allow for

a universal expansion card. This universal output card allows the systems to accept

SAS, IB, Ethernet, and other types of connections.

Installing a Riser Card in the SC825U Chassis:

1. Disconnect the power supply, lay the chassis on a at surface, and open the

chassis cover.

2. Plug the riser card into the designated riser card slot on the motherboard.

Riser cards provide horizontal slots for the expansion cards.

3. Secure the riser card to the riser card bracket with chassis using the screws

provided.

The SC825U chassis accepts four full-height, full-length expansion cards and three

low-prole expansion cards.

Installing Expansion Cards in the SC825U Chassis

1. Disconnect the power supply, lay the chassis on a at surface, and open the

chassis cover.

2. Plug the expansion cards into the appropriate slots on the riser cards, begin-

ning with the lower slots rst and working towards the upper slots.

3. If you are installing low-prole expansion cards, remove the chassis air

shroud to provide more work space.

4. Secure the expansion card to the chassis PCI slot to complete the installation.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Sin comentarios

Supermicro CSE-825TQ-600LPB Manual de usuario Pagina 34