Supermicro CSE-825TQ-600LPB Manual de usuario descargar pdf (Pagina 41)

5-19

Chapter 5: Chassis Setup and Maintenance

Replacing the Power Distributor

Redundant server chassis require a power distributor. The power distributor provides

failover and power supply redundancy. In the unlikely event you must replace the

power distributor, do the following:

1. Power down the server and remove the plug from the wall socket or power

strip.

2. Remove all cable connections to the power supply from the motherboard,

backplane, and other components. Also, remove both power supplies.

3. Locate the power distributor between the power supply and the fan row.

4. Remove the screws securing the power supply.

5. Gently pull the power distributor from the chassis. Gently guide all the cables

through the power distributor housing.

6. Slide the new power distributor module into the power distributor housing.

Make that you slide the cables through the bottom of the housing.

7. Reconnect all the power cables, replace the power supply, and insert the plug

into the wall.

Figure 5-16: Replacing the Power Distributor

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 69 70

Sin comentarios

Supermicro CSE-825TQ-600LPB Manual de usuario Pagina 41