Supermicro SuperServer 1027R-WC1R Manual de usuario descargar pdf (Pagina 20)

2-6

SUPERSERVER 1027R-WC1R/1027R-WC1RT User's Manual

Outer Rails

Installing the Outer Rails to the Rack

1. Attach the shorter outer rail to the outside of the longer outer rail. You must

align the pins with the slides. Both bracket ends must face the same direction.

2. Adjust both the shorter and longer rails to the proper distance so that the rail

ﬁ ts snugly into the rack.

3. Secure the long bracket to the front side of the outer rail with two M5 screws

and the short bracket to the rear side of the outer rail with three M5 screws.

4. Repeat steps 1-4 for the left outer rail.

Secure to the

Front of the Rack

Secure to the

Rear of the Rack

Figure 2-3. Assembling the Outer Rails

Attach Outer Rails

together

Stability hazard. The rack stabilizing mechanism must be in place, or the

rack must be bolted to the ﬂ oor before you slide the unit out for servicing.

Failure to stabilize the rack can cause the rack to tip over.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 119 120

Sin comentarios

Supermicro SuperServer 1027R-WC1R Manual de usuario Pagina 20