Supermicro SuperServer 7036A-T Manual de usuario descargar pdf (Pagina 48)

5-20

SUPERWORKSTATION 7036A-T User's Manual

I

2

C to PCI/PCI-E Slots

Jumper Settings

Jumper Setting Deﬁ nition

JI

2

C1: Closed JI

2

C2:Closed Enabled

JI

2

C1: Open JI

2

C2: Open Disabled

I

2

C Bus to PCI-X/PCI-Exp. Slots

Jumpers JI

2

C1 and JI

2

C2 allow you to

connect the System Management Bus

(I

2

C) to the PCI slots. The default setting

is Open (Disabled.) Both jumpers must

be set to the same setting See the table

on the right for jumper settings.

Watch Dog Enable/Disable

Jumper JWD controls the Watch Dog

function. Watch Dog is a system moni-

tor that can reboot the system when a

software application hangs. Jumping

pins 1-2 will cause WD to reset the

system if an application hangs. Jumping

pins 2-3 will generate a non-maskable

interrupt signal for the application that

hangs. See the table on the right for

jumper settings. Watch Dog must also

be enabled in BIOS.

Note: When enabled, the user needs to

write their own application software in

order to disable the Watch Dog Timer.

Watch Dog

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Reset

Pins 2-3 NMI

Open Disabled

Audio Enable

Jumper JPAC1 allows you to enable the

Audio connection. See the table on the

right for jumper settings.

Audio Enable

Jumper Settings

Jumper Setting Deﬁ nition

1~2 Enabled

2~3 Disabled

LAN1/2 Enable/Disable

Change the setting of jumper JPL1

AND JPL2 to enable or disable the

LAN1/LAN2 Ethernets ports, respec-

tively. See the table on the right for

jumper settings. The default setting is

enabled.

LAN1/2 Enable/Disable

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

Comentarios a estos manuales

Sin comentarios