Supermicro SYS-6028R-T Manual de usuario descargar pdf (Pagina 116)

7-32

SUPERSERVER 6028R-T/TT User's Manual

When SEL is Full

This feature allows the user to determine what the BIOS should do when the sys-

tem event log is full. Select Erase Immediately to erase all events in the log when

the system event log is full. The options are Do Nothing and Erase Immediately.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.

Log EFI Status Codes

Select EFI (Extensible Firmware Interface) Status Codes to log EFI status codes.

Select Error Codes to log EFI error codes. Select Progress Code to log the EFI

progress code. Select both to log both EFI error codes and progress codes. The

options are Disabled, Both, Error code and Progress code.

Note: After making changes on a setting, be sure to reboot the system for

the changes to take effect.

BMC Network Conguration

The following items will be displayed:

LAN Channel 1

Conguration Address Source

Use this item to select the IP address source for this computer. If Static is selected,

you will need to know the IP address of this computer and enter it to the system

manually in the eld. If DHCP is selected, AMI BIOS will search for a DHCP (Dy-

namic Host Conguration Protocol) server attached to the network and request the

next available IP address for this computer. The options are DHCP Unspecied,

and Static.

Current Conguration Address Source

This item displays the current conguration address source.

Station IP Address

This item displays the Station IP address for this computer. This should be in decimal

and in dotted quad form (i.e., 192.168.10.253).

Subnet Mask

This item displays the sub-network that this computer belongs to. The value of each

three-digit number is separated by dots and it should not exceed 255.

Station MAC Address

This item displays the Station MAC address for this computer. Mac addresses are

6 two-digit hexadecimal numbers.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 127 128

Sin comentarios

Supermicro SYS-6028R-T Manual de usuario Pagina 116