Supermicro SYS-6028R-T Manual de usuario descargar pdf (Pagina 79)

Chapter 6: Advanced Chassis Setup

6-5

Figure 6-3. Mounting a Drive in a Carrier

Caution: Regardless of how many hard drives are installed, all drive carriers must

remain in the drive bays for proper airow.

Warning: Use caution when working around the SATA backplane. Do not touch the

backplane with any metal objects and make sure no ribbon cables touch the backplane

or obstruct the holes, which aid in proper airow.

Caution: Enterprise level hard disk drives are recommended for use in Supermicro

chassis and servers. For information on recommended HDDs, visit the Supermicro Web

site at http://www.supermicro.com/products/nfo/les/storage/SAS-1-CompList-110909.

pdf

SATA Drive Installation

The SATA drives are mounted in drive carriers to simplify their installation and

removal from the chassis. Since these carriers also help promote proper airow

for the drive bays, even empty carriers without drives installed must remain in the

chassis.

Mounting a SATA Drive in a Drive Carrier

To add a new hard drive, install a drive into the carrier with the printed circuit board

side toward the carrier so that the mounting holes align with those in the carrier.

Secure the drive to the carrier with four screws, as shown in Figure 6-3.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 127 128

Sin comentarios

Supermicro SYS-6028R-T Manual de usuario Pagina 79