Supermicro SYS-7046A-6 Manual de usuario descargar pdf (Pagina 48)

5-16

SuperWorkstation 7046A-6 User's Manual

SGPIO Header

Two SGPIO (Serial General Purpose

Input/Output) headers are designated

SGPIO0 and SGPIO1. These head-

ers are used to communicate with

the system's enclosure management

chip. See the table on the right for pin

deﬁ nitions.

SGPIO Header

Pin Deﬁ nitions

Pin# Deﬁ nition Pin Deﬁ nition

1NC 2 NC

3 Ground 4 DATA Out

5 Load 6 Ground

7 Clock 8 NC

NC = No Connection

Serial Ports

Two serial ports are included on the

H8DA6. See the table on the right for

pin deﬁ nitions.

Serial Port Pin Deﬁ nitions

Pin # Deﬁ nition Pin # Deﬁ nition

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI

5 Ground 10 NC

Speaker

On the JD1 header, pins 3~4 are used

for the internal speaker. Close pins

3~4 to use the onboard speaker. If

you wish to use an external speaker,

connect the speaker cable to pins

1~4. See the table on the right for pin

deﬁ nitions.

Speaker Connector

Pin Deﬁ nitions

Pin Setting Deﬁ nition

Pins 3~4 Internal Speaker

Pins1~4 External Speaker

Audio Input CD Header

Pin Deﬁ nitions

Pin# Deﬁ nition

1 Left Stereo Signal

2 Ground

3 Ground

4 Right Stereo Signal

CD and Audio FP

A 4-pin CD header (CD-IN) and an

auxiliary header (Audio FP) allow you

to use the onboard sound for audio

CD playback. Connect an audio cable

from your CD drive to the header that

ﬁ ts your cable's connector. Only one

header can be used at a time. See the

table at right for pin deﬁ nitions.

RAIDKey (Optional)

A RAIDKey header, located at JIBTN1,

provides RAID function support to

enhance the performance of Intel

HostRAID and LSI Mega-RAID. (AOC-

IMRRAkey-LSI-2008 is optional.)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 97 98

Comentarios a estos manuales

Sin comentarios