Supermicro SYS-7046A-6 Manual de usuario descargar pdf (Pagina 83)

Chapter 7: BIOS

7-15

LSI SAS2 2008 Option ROM

Select Enabled to enable the LSI SAS2 2008 Option ROM. This is to boot comput-

ers using a network interface. The options are Enabled and Disabled.

XSuper IO Device Conﬁ guration

Onboard Floppy Controller

Select Enable to enable the onboard Floppy Controller. The options are Enabled

and Disabled.

Floppy A/Floppy B

This feature allows the user to select the type of ﬂ oppy drive connected to the sys-

tem as speciﬁ ed. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3

1/2", 1.44MB 3 1/2" and 2.88MB 3 1/2". The default setting for Floppy A is 1.44MB

3 1/2", and for Floppy B is Disabled.

Serial Port1 Address/ Serial Port2 Address

This option speciﬁ es the base I/O port address and the Interrupt Request address

of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from

accessing any system resources. When this option is set to Disabled, the serial port

physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8

as its I/O port address and IRQ 4 for the interrupt address. The options for Serial

Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2

are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.

Serial Port 2 Mode

Use this feature to conﬁ gure Serial Port 2 mode. The options are Normal, IrDA

and ASK IR. IrDA (Infrared Data) is an industry standard for remote control de-

vices. ASK IR (Amplitude Shifted Keying Infrared) is a protocol compatible with

Sharp® branded PDAs and other infrared devices.

XRemote Access Conﬁ guration

Remote Access

This allows the user to enable the Remote Access feature. The options are Dis-

abled and Enabled.

If Remote Access is set to Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console

Redirection. The options are COM 1 and COM 2.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 97 98

Sin comentarios

Supermicro SYS-7046A-6 Manual de usuario Pagina 83