Supermicro SuperChassis 836BA-R1K28B Manual de usuario descargar pdf (Pagina 52)

SC836 Chassis Manual

5-8

Installing an Expansion Card

Installing Expansion Cards

1. Remove the chassis cover.

2. Locate the motherboard port aligned with the PCI card slot where the expan-

sion card will be installed.

3. Each PCI slot cover is secured by one screw located on the top (inside) the

chassis. Remove this screw.

4. Remove the PCI slot cover by sliding it upward.

5. Gently slide the expansion card into the correct motherboard slot. If the

expansion card requires a riser card, install it at this time. Slide the card into

the PCI slot and close the latch. Never force a component into a motherboard

or the chassis.

6. Secure the expansion card with the screw from the I/O panel.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 143 144

Sin comentarios

Supermicro SuperChassis 836BA-R1K28B Manual de usuario Pagina 52