Supermicro SuperChassis 836BA-R1K28B Manual de usuario descargar pdf (Pagina 77)

A-3

Appendix A: Chassis Cables

Description: This cable has one SFF-8484 (32-pin) connector on one end and

four SAS connectors (7 pins each) at the other. This cable connects from the host

(motherboard or other controller) to the backplane SAS hard drive port.

Cable Name: SAS Cable Quantity: 1

Part #: CBL-0175L

Alt. Name: "Big Four"

Description: This cable has one iPass (SFF-8087/Mini-SAS) connector (36-pin) at

one end and four SAS connectors on the opposite end. This cable connects from

the host (motherboard or other controller) to the backplane SAS hard drive port.

Cable Name: SAS Cable Quantity: 1

Part #: CBL-0116

Alt. Name: iPass or "Small Four"

A-4 Compatible Cables

This section lists cables included with the SC836 chassis packages.

Alternate SAS Cables

Some compatible motherboards have different connectors. If your motherboard has

only one SAS connector that the SAS cables must share, use one of the following

cables. These cables must be purchased separately.

Cascading/JBOD SAS Cables

Use the following cables when setting up a cascading or JBOD system.

Description: Internal cable. Connects the backplane to the host bus adapter or

external port. Used in single port environments.

Cable Name: SAS Cable Quantity: varies by setup

Part #: CBL-0167L

Ports: Single

Placement: Internal cable

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 143 144

Sin comentarios

Supermicro SuperChassis 836BA-R1K28B Manual de usuario Pagina 77