Supermicro SuperServer 8047R-TRF+ Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 122
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL
4-2
Serverboard Battery: CAUTION - There is a danger of explosion if the onboard
CR2032 battery is installed upside down, which will reverse its polarites (see
Figure 4-1). This battery must be replaced only with the same or an equivalent
type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions.
Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive
Temperature Coef cient) fuses on the mainboard must be replaced by trained
service technicians only. The new fuse must be the same or equivalent as the
one replaced. Contact technical support for details and support.
4-2 General Safety Precautions
!
Follow these rules to ensure general safety:
Keep the area around the SuperServer 8047R-TRF+/7RFT+ clean and free of
clutter.
The SuperServer 8047R-TRF+/7RFT+ weighs approximately 85 lbs (38.6kg)
when fully loaded. When lifting the system, two people at either end should lift
slowly with their feet spread out to distribute the weight. Always keep your back
straight and lift with your legs.
Place the chassis top cover and any system components that have been
removed away from the system or on a table so that they won't accidentally
be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits or
be pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are excellent metal
conductors that can create short circuits and harm you if they come into contact
with printed circuit boards or areas where power is present.
After accessing the inside of the system, close the system back up and secure
it to the rack unit with the retention screws after ensuring that all connections
have been made.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 121 122

Comentarios a estos manuales

Sin comentarios