Supermicro SuperServer 8047R-TRF+ Manual de usuario descargar pdf (Pagina 60)

5-20

SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL

T-SGPIO 1/2 Headers

Two SGPIO (Serial-Link General

Purpose Input/Output) headers are

located on the motherboard. These

headers support Serial Link interfaces

for onboard SATA connections. See

the table on the right for pin deﬁ nitions.

T-SGPIO

Pin Deﬁ nitions

Pin# Deﬁ nition Pin Deﬁ nition

1NC 2NC

3 Ground 4 Data

5 Load 6 Ground

7 Clock 8 NC

NC = No Connection

IPMB Header

A System Management Bus header for

IPMI 2.0 is located at JIPMB1. Connect

the appropriate cable here to use the

IPMB I

2

C connection on your system.

IPMB Header

Pin Deﬁ nitions

Pin# Deﬁ nition

1 Data

2 Ground

3 Clock

4 No Connection

Unit Identiﬁ er Switch

A Unit Identifier (UID) switch and

two LED indicators are provided on

the serverboard. The UID Switch is

located next to the LAN ports on the

I/O backplane. The rear UID LED is

located next to the UID switch. The

Front Panel UID LED is located on

pins 7/8 of JF1 (Control Panel header).

Connect a cable to pin 8 on JF1 for the

Front Panel UID LED. When you press

the UID switch, both the rear and the

Front Panel UID indicators will be turned

on. Press the UID switch again to turn

off both LED Indicators. These UID

Indicators provide easy identiﬁ cation

of a system unit that may be in need

of service.

Note: UID can also be triggered via

IPMI. For more information on IPMI,

please refer to the IPMI User's Guide

posted on our Website @ http://www.

supermicro.com.

UID Switch

Pin# Deﬁ nition

1 Ground

2 Ground

3 Button In

4 Ground

UID LED (LE2)

Status

Color/State OS Status

Blue: On Windows OS Unit Identiﬁ ed

Blue:

Blinking

Linux OS Unit Identiﬁ ed

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 121 122

Comentarios a estos manuales

Sin comentarios