Supermicro SYS-6015V-TB Manual de usuario descargar pdf (Pagina 36)

5-2

UPERSERVER 6015V-T/6015V-TLP User’s Manual

5-2 Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure

on the label area of the fan. Also, do not place the serverboard on a

conductive surface, which can damage the BIOS battery and prevent

the system from booting up.

IMPORTANT! Always connect the power cord last and remove it ﬁ rst before add-

ing, removing or changing any hardware components. Make sure that you install

the processor into the CPU socket before you install the heatsink and fan. The

6015V-T/6015V-TLP can support either one or two processors (must be low-volt-

age processors for the 6015V-TLP). If installing one processor only, install it into

CPU socket #1.

Notes:

1. Intel's boxed Xeon CPU package contains a CPU fan and heatsink assembly. If

you buy a CPU separately, make sure that you use only Intel-certiﬁ ed multi-direc-

tional heatsinks and fans.

2. When purchasing a 5300/5100/5000 series processor or when receiving a

serverboard with one pre-installed, make sure that the CPU plastic cap is in place

and none of the CPU pins are bent; otherwise, contact the retailer immediately.

Installing the LGA 771 Processor

1. A black PnP cap is attached to the

load plate to protect the CPU socket.

Press the load lever down and away

from the retention clasp to release the

load plate from its locked position.

Load lever

2. Gently lift the load lever to open the

load plate.

PnP cap

Load plate released

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 121 122

Sin comentarios

Supermicro SYS-6015V-TB Manual de usuario Pagina 36