Supermicro SYS-6015V-TB Manual de usuario descargar pdf (Pagina 64)

6-6

UPERSERVER 6015V-T/6015V-TLP User's Manual

Serial ATA Power Cables

Serial ATA power cables should be routed so that they do not block the airﬂ ow

through the chassis. See the serverboard layout diagram for the location of the

cable connections.

DVD-ROM Drive Installation

The top cover of the chassis must be opened to gain full access to the DVD-ROM

drive bay. The DVD-ROM drive must have a "slim" proﬁ le to ﬁ t into the 6015V-

T/6015V-TLP.

First, release the retention screws that secure the unit to the rack. Grasp the two

handles on either side and pull the unit straight out until it locks (you will hear a

"click"). Next, depress the two buttons on the top of the chassis to release the

top cover and at the same time, push the cover away from you until it stops. You

can then lift the top cover from the chassis to gain full access to the inside of the

server. You must power down the system before installing or removing a DVD-

ROM drive.

Drives mount on rails and should "click" into place to be correctly and fully installed

in their bays. A red mark on a wire typically designates the location of pin 1.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 121 122

Sin comentarios

Supermicro SYS-6015V-TB Manual de usuario Pagina 64