Supermicro SYS-8016B-6F Manual de usuario descargar pdf (Pagina 45)

Chapter 5: Advanced Serverboard Setup

5-13

Reset Button

Pins 3 and 4 of JF1 attaches to the

reset button on the computer chas-

sis. See the table on the right for pin

deﬁ nitions.

Power Button

The power button connection is

located on pins 1 and 2 of JF1. Mo-

mentarily contacting both pins will

power on/off the system. This button

can also be conﬁ gured to function as

a suspend button (with a setting in the

BIOS). To turn off the power when the

system is set to suspend mode, press

the button for at least 4 seconds.

Refer to the table on the right for pin

deﬁ nitions.

5-9 Connector Deﬁ nitions

Required Connection

+12V 8-pin Power

Pin Deﬁ nitions

Pins Deﬁ nition

1 - 4 Ground

5 - 8 +12V

ATX Power 24-pin Connector

Pin Deﬁ nitions

Pin# Deﬁ nition Pin # Deﬁ nition

13 +3.3V 1 +3.3V

14 -12V 2 +3.3V

15 COM 3 COM

16 PS_ON 4 +5V

17 COM 5 COM

18 COM 6 +5V

19 COM 7 COM

20 Res (NC) 8 PWR_OK

21 +5V 9 5VSB

22 +5V 10 +12V

23 +5V 11 +12V

24 COM 12 +3.3V

Reset Button

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

3 Reset

4 Ground

Power Button

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

1 PW_ON

2 Ground

Processor Power Connector

JPW1, JPW2, JPW4 and JPW5 must

also be connected to the power supply

to provide power for the processors.

See the table on the right for pin

deﬁ nitions.

Main ATX Power Supply

Connector

The primary power supply connector

(JPW3) meets the SSI EPS 24-pin

speciﬁ cation. Refer to the table on the

right for the pin deﬁ nitions of the ATX

24-pin power connector. You must

also connect the four 8-pin processor

power connectors to your power sup-

ply (see below).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 105 106

Comentarios a estos manuales

Sin comentarios