Supermicro SYS-8016B-6F Manual de usuario descargar pdf (Pagina 50)

5-18

SUPERSERVER 8016B-6F/8016B-TF User's Manual

LAN1/2 (Ethernet Ports)

Two Ethernet ports (designated LAN1

and LAN2) are located on the I/O

backplane. A dedicated IPMI LAN

port (above the USB0/1 ports) is also

provided. These ports accept RJ45

type cables.

Universal Serial Bus (USB)

There are two Universal Serial Bus

ports located on the I/O panel and

three additional USB headers located

on the serverboard. The headers can

be used to provide front side USB

access (cables not included). See the

table on the right for pin deﬁ nitions.

Universal Serial Bus

Pin Deﬁ nitions (USB)

USB0/1

Pin # Deﬁ nition

USB2/3, 5

Pin # Deﬁ nition

1 +5V 1 +5V

2 PO- 2 PO-

3 PO+ 3 PO+

4 Ground 4 Ground

5 N/A 5 NC or Key

NC = No Connection

Unit Identiﬁ er Switch

A Unit Identiﬁ er (UID) switch and two

LED indicators are provided on the

serverboard. The UID Switch is lo-

cated next to the LAN ports on the I/O

backplane. The rear UID LED (LED26)

is located next to the UID switch. The

Front Panel UID LED is located on

pin 8 of JF1 (Control Panel header).

Connect a cable to pin 8 on JF1 for

the Front Panel UID LED. When you

press the UID switch, both the rear

and the Front Panel UID indicators

will be turned on. Press the UID switch

again to turn off both LED Indicators.

These UID Indicators provide easy

identiﬁ cation of a system unit that may

be in need of service.

Note: UID can also be triggered via

IPMI. For more information on IPMI,

please refer to the IPMI User's Guide

posted on our Website @ http://www.

supermicro.com.

UID Switch

Pin# Deﬁ nition

1 Ground

2 Ground

3 Button In

4 Ground

UID LED (LE2)

Status

Color/State OS Status

Blue: On Windows OS Unit Identiﬁ ed

Blue:

Blinking

Linux OS Unit Identiﬁ ed

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 105 106

Comentarios a estos manuales

Sin comentarios