Supermicro AOC-XEH-IN2 Manual de usuario Pagina 231

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 392
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 230
7-133
Chapter 7: 1/10-Gb Ethernet Switch Firmware
Interface
Clicking the INTERFACE tab brings up the OSPF INTERFACE CONFIGURATION page
(Figure 7-118). The parameters for this page are shown in Table 7-92.
Figure 7-118. OSPF Interface Configuration Page
Table 7-92. OSPF Interface Configuration Page Parameters
Parameter Description
Interface This parameter specifies the interface index of the port.
Area ID
This parameter indicates the 32-bit integer uniquely identifying the area to
which the interface connects.
Priority
This parameter specifies the priority of this interface, which is used in the
DR election algorithm.
Authentication Type
This parameter allows you to choose MD5, Simple Password or None as
the authentication type.
MD5 Key ID
This parameter specifies the secret key used to create the message digest
appended to the OSPF packet, if the authentication type is MD5.
Authentication Key
This parameter specifies the key required for authentication, if
authentication is enabled on this interface.
IP Address This parameter specifies the IP Address of the OSPF interface.
Vista de pagina 230
1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 391 392

Comentarios a estos manuales

Sin comentarios