Supermicro AOC-XEH-IN2 Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 392
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
5-5
Chapter 5: Ethernet Modules
5-3 SBM-GEM-002 1Gb Ethernet Pass-through Module
The SBM-GEM-002 Gigabit pass-through module is a non-configurable pass through
module that includes fourteen (14) 1-Gb/s uplink (RJ45) ports and fourteen 1-Gb/s
downlink ports for the SuperBlade's LAN interfaces. This Ethernet module has two
internal Ethernet paths to the CMM(s). The switch is used to provide a connection
between the Ethernet controller integrated on the mainboard and an external Ethernet
device.
Unlike the SBM-GEM-001 Gigabit Ethernet switch module, this is a pass-through
module and is not configurable. With this module Blade 1 would be connected directly to
port 1, Blade 2 to port 2 and so on. If you are only connected to 10 blades then ports 11
through 14 are not connected.
Temperature and voltage of the pass-through module are read through the CMM
module. The LED’s of the pass-through for a blade are only lit when the blade is on. Like
the SBM-GEM-001 Gigabit Ethernet switch module, this pass-through module is a
hot-pluggable module. See Figure 5-3, Table 5-7 and Table 5-8 for switch details.
Figure 5-3. SBM-GEM-002 Gigabit Pass-through Module
NOTE: The SBM-GEM-002 Gigabit pass-through module must be connected
to another Gigabit Ethernet switch module in order to operate. If you connect it
to a 10/100 switch, it will not work.
2
3
1
2
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 391 392

Comentarios a estos manuales

Sin comentarios